ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / include

/*
 * Copyright (c) 1987, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)sysexits.h	8.1 (Berkeley) 6/2/93
 */

#ifndef	_SYSEXITS_H
#define	_SYSEXITS_H 1

/*
 *  SYSEXITS.H -- Exit status codes for system programs.
 *
 *	This include file attempts to categorize possible error
 *	exit statuses for system programs, notably delivermail
 *	and the Berkeley network.
 *
 *	Error numbers begin at EX__BASE to reduce the possibility of
 *	clashing with other exit statuses that random programs may
 *	already return.  The meaning of the codes is approximately
 *	as follows:
 *
 *	EX_USAGE -- The command was used incorrectly, e.g., with
 *		the wrong number of arguments, a bad flag, a bad
 *		syntax in a parameter, or whatever.
 *	EX_DATAERR -- The input data was incorrect in some way.
 *		This should only be used for user's data & not
 *		system files.
 *	EX_NOINPUT -- An input file (not a system file) did not
 *		exist or was not readable.  This could also include
 *		errors like "No message" to a mailer (if it cared
 *		to catch it).
 *	EX_NOUSER -- The user specified did not exist.  This might
 *		be used for mail addresses or remote logins.
 *	EX_NOHOST -- The host specified did not exist.  This is used
 *		in mail addresses or network requests.
 *	EX_UNAVAILABLE -- A service is unavailable.  This can occur
 *		if a support program or file does not exist.  This
 *		can also be used as a catchall message when something
 *		you wanted to do doesn't work, but you don't know
 *		why.
 *	EX_SOFTWARE -- An internal software error has been detected.
 *		This should be limited to non-operating system related
 *		errors as possible.
 *	EX_OSERR -- An operating system error has been detected.
 *		This is intended to be used for such things as "cannot
 *		fork", "cannot create pipe", or the like.  It includes
 *		things like getuid returning a user that does not
 *		exist in the passwd file.
 *	EX_OSFILE -- Some system file (e.g., /etc/passwd, /etc/utmp,
 *		etc.) does not exist, cannot be opened, or has some
 *		sort of error (e.g., syntax error).
 *	EX_CANTCREAT -- A (user specified) output file cannot be
 *		created.
 *	EX_IOERR -- An error occurred while doing I/O on some file.
 *	EX_TEMPFAIL -- temporary failure, indicating something that
 *		is not really an error.  In sendmail, this means
 *		that a mailer (e.g.) could not create a connection,
 *		and the request should be reattempted later.
 *	EX_PROTOCOL -- the remote system returned something that
 *		was "not possible" during a protocol exchange.
 *	EX_NOPERM -- You did not have sufficient permission to
 *		perform the operation.  This is not intended for
 *		file system problems, which should use NOINPUT or
 *		CANTCREAT, but rather for higher level permissions.
 */

#define EX_OK		0	/* successful termination */

#define EX__BASE	64	/* base value for error messages */

#define EX_USAGE	64	/* command line usage error */
#define EX_DATAERR	65	/* data format error */
#define EX_NOINPUT	66	/* cannot open input */
#define EX_NOUSER	67	/* addressee unknown */
#define EX_NOHOST	68	/* host name unknown */
#define EX_UNAVAILABLE	69	/* service unavailable */
#define EX_SOFTWARE	70	/* internal software error */
#define EX_OSERR	71	/* system error (e.g., can't fork) */
#define EX_OSFILE	72	/* critical OS file missing */
#define EX_CANTCREAT	73	/* can't create (user) output file */
#define EX_IOERR	74	/* input/output error */
#define EX_TEMPFAIL	75	/* temp failure; user is invited to retry */
#define EX_PROTOCOL	76	/* remote error in protocol */
#define EX_NOPERM	77	/* permission denied */
#define EX_CONFIG	78	/* configuration error */

#define EX__MAX	78	/* maximum listed value */

#endif /* sysexits.h */

[+] ..
[-] ucontext.h [edit]
[-] syscall.h [edit]
[-] complex.h [edit]
[-] pnglibconf.h [edit]
[-] nc_tparm.h [edit]
[-] wordexp.h [edit]
[-] fmtmsg.h [edit]
[-] dlfcn.h [edit]
[-] ncurses_dll.h [edit]
[+] freetype2
[+] GL
[+] glib-2.0
[-] cursesw.h [edit]
[-] cursesf.h [edit]
[-] printf.h [edit]
[+] c++
[-] expat.h [edit]
[-] proc_service.h [edit]
[-] fnmatch.h [edit]
[-] regex.h [edit]
[-] oniguruma.h [edit]
[-] semaphore.h [edit]
[-] gshadow.h [edit]
[-] pcre2posix.h [edit]
[-] expat_external.h [edit]
[-] link.h [edit]
[-] errno.h [edit]
[-] ldap_utf8.h [edit]
[-] ftw.h [edit]
[-] math.h [edit]
[+] neteconet
[-] form.h [edit]
[-] err.h [edit]
[-] syslog.h [edit]
[+] arpa
[-] inttypes.h [edit]
[-] event.h [edit]
[-] fenv.h [edit]
[-] pty.h [edit]
[-] ldap_features.h [edit]
[-] monetary.h [edit]
[+] iproute2
[-] poll.h [edit]
[-] tgmath.h [edit]
[+] misc
[-] wctype.h [edit]
[-] tar.h [edit]
[-] aio.h [edit]
[+] tirpc
[-] stdlib.h [edit]
[-] envz.h [edit]
[+] protocols
[-] re_comp.h [edit]
[-] ncurses.h [edit]
[-] db.h [edit]
[+] lua5.3
[+] netipx
[-] alloca.h [edit]
[-] cpio.h [edit]
[-] mpath_cmd.h [edit]
[+] netax25
[-] fcntl.h [edit]
[-] sgtty.h [edit]
[-] ctype.h [edit]
[+] xen
[-] stdc-predef.h [edit]
[+] x86_64-linux-gnu
[-] features.h [edit]
[+] rpcsvc
[-] pcrecpparg.h [edit]
[-] nss.h [edit]
[-] cursesapp.h [edit]
[-] crypt.h [edit]
[-] term.h [edit]
[+] blkid
[-] libgen.h [edit]
[+] mtd
[-] elf.h [edit]
[-] panel.h [edit]
[-] limits.h [edit]
[-] etip.h [edit]
[+] libpng16
[-] cursslk.h [edit]
[-] grp.h [edit]
[-] evhttp.h [edit]
[-] mntent.h [edit]
[-] string.h [edit]
[-] wchar.h [edit]
[-] nl_types.h [edit]
[-] fstab.h [edit]
[-] evutil.h [edit]
[-] pcre2.h [edit]
[-] openldap.h [edit]
[-] stab.h [edit]
[-] mpath_persist.h [edit]
[+] sound
[-] gnu-versions.h [edit]
[-] assert.h [edit]
[+] netinet
[+] rdma
[-] ttyent.h [edit]
[-] thread_db.h [edit]
[-] ulimit.h [edit]
[-] mqueue.h [edit]
[+] netash
[-] ldap_cdefs.h [edit]
[+] xfs
[-] libintl.h [edit]
[-] gconv.h [edit]
[-] wait.h [edit]
[+] selinux
[+] ncursesw
[-] setjmp.h [edit]
[+] netiucv
[+] python3.8
[+] xcb
[-] locale.h [edit]
[+] rpc
[-] unistd.h [edit]
[-] sched.h [edit]
[-] time.h [edit]
[-] onigposix.h [edit]
[-] zconf.h [edit]
[-] pwd.h [edit]
[+] asm-generic
[+] gio-unix-2.0
[-] fts.h [edit]
[+] netrom
[+] linux
[-] stdio_ext.h [edit]
[-] pngconf.h [edit]
[-] sudo_plugin.h [edit]
[-] threads.h [edit]
[+] python2.7
[+] cairo
[-] evrpc.h [edit]
[-] evdns.h [edit]
[-] termios.h [edit]
[-] lber_types.h [edit]
[+] reglib
[-] utmp.h [edit]
[-] ldif.h [edit]
[-] paths.h [edit]
[-] pcrecpp.h [edit]
[+] libpng
[-] pthread.h [edit]
[-] stdint.h [edit]
[-] utime.h [edit]
[-] langinfo.h [edit]
[+] finclude
[-] db_185.h [edit]
[-] execinfo.h [edit]
[-] strings.h [edit]
[+] netatalk
[-] lastlog.h [edit]
[-] dirent.h [edit]
[-] ar.h [edit]
[+] readline
[-] shadow.h [edit]
[-] curses.h [edit]
[-] getopt.h [edit]
[-] spawn.h [edit]
[-] signal.h [edit]
[+] sepol
[-] mcheck.h [edit]
[+] unicode
[-] ifaddrs.h [edit]
[-] tic.h [edit]
[-] unctrl.h [edit]
[-] byteswap.h [edit]
[+] libmount
[-] stdio.h [edit]
[-] pcre.h [edit]
[+] libdmmp
[-] termio.h [edit]
[-] pcreposix.h [edit]
[-] oniggnu.h [edit]
[-] values.h [edit]
[-] pcre_stringpiece.h [edit]
[-] iconv.h [edit]
[-] netdb.h [edit]
[-] cursesp.h [edit]
[+] X11
[-] memory.h [edit]
[-] obstack.h [edit]
[-] endian.h [edit]
[-] cursesm.h [edit]
[-] error.h [edit]
[+] drm
[+] net
[-] utmpx.h [edit]
[-] malloc.h [edit]
[-] gawkapi.h [edit]
[-] ltdl.h [edit]
[-] gnumake.h [edit]
[+] scsi
[-] termcap.h [edit]
[-] regexp.h [edit]
[-] argz.h [edit]
[-] eti.h [edit]
[-] aliases.h [edit]
[+] openssl
[-] resolv.h [edit]
[-] glob.h [edit]
[+] libxml2
[+] netrose
[+] webp
[+] security
[-] sysexits.h [edit]
[-] argp.h [edit]
[-] pcre_scanner.h [edit]
[+] uuid
[+] nfs
[-] search.h [edit]
[+] video
[-] ldap_schema.h [edit]
[-] uchar.h [edit]
[+] pixman-1
[-] zlib.h [edit]
[-] lber.h [edit]
[+] apache2
[+] event2
[-] menu.h [edit]
[-] ldap.h [edit]
[-] term_entry.h [edit]
[+] fontconfig
[+] netpacket
[+] libltdl
[-] png.h [edit]