ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: etc

## This is the default configuration for hdparm for Debian.  It is a
## rather simple script, so please follow the following guidelines :)
## Any line that begins with a comment is ignored - add as many as you
## like.  Note that an in-line comment is not supported.  If a line
## consists of whitespace only (tabs, spaces, carriage return), it will be
## ignored, so you can space control fields as you like.  ANYTHING ELSE
## IS PARSED!!  This means that lines with stray characters or lines that
## use non # comment characters will be interpreted by the initscript.
## This has probably minor, but potentially serious, side effects for your
## hard drives, so please follow the guidelines.  Patches to improve
## flexibilty welcome.  Please read /usr/share/doc/hdparm/README.Debian for
## notes about known issues, especially if you have an MD array.
##
## Note that if the init script causes boot problems, you can pass 'nohdparm'
## on the kernel command line, and the script will not be run.
##
## Uncommenting the options below will cause them to be added to the DEFAULT
## string which is prepended to options listed in the blocks below.
##
## If an option is listed twice, the second instance replaces the first.
##
## /sbin/hdparm is not run unless a block of the form:
##      DEV {
##         option
##         option
##         ...
##      }
## exists.  This blocks will cause /sbin/hdparm OPTIONS DEV to be run.
## Where OPTIONS is the concatenation of all options previously defined
## outside of a block and all options defined with in the block.

# -q be quiet
quiet
# -a sector count for filesystem read-ahead
#read_ahead_sect = 12
# -A disable/enable the IDE drive's read-lookahead feature
#lookahead = on
# -b bus state
#bus = on
# -B apm setting
#apm = 255
# -B apm setting when on battery
#apm_battery = 127
# -c enable (E)IDE 32-bit I/O support - can be any of 0,1,3
#io32_support = 1
# -d disable/enable the "using_dma" flag for this drive
#dma = off
# -D enable/disable the on-drive defect management
#defect_mana = off
# -E cdrom speed
#cd_speed = 16
# -k disable/enable the "keep_settings_over_reset" flag for this drive
#keep_settings_over_reset = off
# -K disable/enable the drive's "keep_features_over_reset" flag
#keep_features_over_reset = on
# -m sector count for multiple sector I/O
#mult_sect_io = 32
# -P maximum sector count for the drive's internal prefetch mechanism
#prefetch_sect = 12
# -r read-only flag for device
#read_only = off
# -R Enable/Disable Write-Read-Verify, on to enable (R1), off to disable (R0)
# write_read_verify = off
# -s Turn on/off power on in standby mode
# poweron_standby = off
# -S standby (spindown) timeout for the drive
#spindown_time = 24
# "force_spindown_time" - the same as "-S", but will be applied even if disk
# doesn't support APM. Use on your own risk. This is debian specific option.
# See also #758988
#force_spindown_time = 24
# -u interrupt-unmask flag for the drive
#interrupt_unmask = on
# -W Disable/enable the IDE drive's write-caching feature
#write_cache = off
# -X IDE transfer mode for newer (E)IDE/ATA2 drives
#transfer_mode = 34
# -y force to immediately enter the standby mode
#standby
# -Y force to immediately enter the sleep mode
#sleep
# -Z Disable the power-saving function of certain Seagate drives
#disable_seagate
# -M Set the acoustic management properties of a drive
#acoustic_management
# -p Set the chipset PIO mode
# chipset_pio_mode
# --security-freeze Freeze the drive's security status
# security_freeze
# --security-unlock Unlock the drive's security
# security_unlock = PWD
# --security-set-pass Set security password
# security_pass = password
# --security-disable Disable drive locking
# security_disable
# --user-master Select password to use
# user-master = u
# --security-mode Set the security mode
# security_mode = h

# Root file systems.  Please see README.Debian for details
# ROOTFS = /dev/hda

## New note - you can use straight hdparm commands in this config file
## as well - the set up is ugly, but it keeps backwards compatibility
## Additionally, it should be noted that any blocks that begin with
## the keyword 'command_line' are not run until after the root filesystem
## is mounted.  This is done to avoid running blocks twice.  If you need
## to run hdparm to set parameters for your root disk, please use the
## standard format.

#Samples follow:
#First three are good for devfs systems, fourth one for systems that do
#not use devfs.  The fifth example uses straight hdparm command line
#syntax.  Any of the blocks that use command line syntax must begin with
#the keyword 'command_line', and no attempt is made to validate syntax.
#It is provided for those more comfortable with hdparm syntax.

#/dev/discs/disc0/disc {
#	mult_sect_io = 16
#	write_cache = off
#	spindown_time = 240
#}

#/dev/discs/disc1/disc {
#	mult_sect_io = 32
#	spindown_time = 36
#	write_cache = off
#}

#/dev/cdroms/cdrom0 {
#	dma = on
#	interrupt_unmask = on
#	io32_support = 0
#}

#/dev/hda {
#	mult_sect_io = 16
#	write_cache = off
#	dma = on
#}

[+] ..
[+] logrotate.d
[-] userplans [edit]
[-] warnquota.conf [edit]
[-] subgid- [edit]
[+] usb_modeswitch.d
[+] vfilters
[-] libaudit.conf [edit]
[+] sysconfig
[-] backupmxhosts [edit]
[+] perl
[-] cpupdate.conf-1645001869 [edit]
[-] exim.crt [edit]
[+] apparmor.d
[-] deluser.conf [edit]
[+] modprobe.d
[+] libpaper.d
[+] udisks2
[-] greylist_common_mail_providers [edit]
[-] shadow.nouids.cache [edit]
[+] cron.d
[-] resolv.conf.sav [edit]
[-] group [edit]
[-] localdomains.dpkg-dist [edit]
[+] rc4.d
[+] polkit-1
[-] relayhostsusers [edit]
[+] fwupd
[+] network
[-] os-release [edit]
[-] gshadow [edit]
[+] ModemManager
[-] lock_manager_local.ini [edit]
[-] cpupdate.conf [edit]
[-] subuid [edit]
[-] crypttab [edit]
[+] alternatives
[-] issue.net [edit]
[+] mono
[+] rc3.d
[-] outgoing_mail_suspended_users [edit]
[-] agent360.ini [edit]
[-] eximrejects.dpkg-dist [edit]
[+] dbus-1
[-] ld.so.conf [edit]
[+] grub.d
[-] eximmailtrap [edit]
[+] ssh
[-] trueuserdomains [edit]
[-] antivirus.exim [edit]
[-] mime.types [edit]
[-] mailips [edit]
[+] modules-load.d
[-] exim.pl.local [edit]
[-] locale.gen [edit]
[-] demousers [edit]
[+] emacs
[+] cryptsetup-initramfs
[-] domainips [edit]
[-] request-key.conf [edit]
[-] ld.so.cache [edit]
[-] localaliases [edit]
[+] profile.d
[-] exim_trusted_configs [edit]
[-] passwd.cache [edit]
[-] hosts.deny [edit]
[-] crontab [edit]
[-] shadow [edit]
[-] lsb-release [edit]
[+] zabbix
[+] newt
[-] screenrc [edit]
[-] suphp.conf [edit]
[+] rc5.d
[+] iproute2
[+] pm
[-] exim.pl [edit]
[-] greylist_trusted_netblocks [edit]
[-] inputrc [edit]
[+] ubuntu-advantage
[+] cron.monthly
[-] papersize [edit]
[-] agent360.ini.dpkg-dist [edit]
[-] smartd.conf [edit]
[-] wwwacct.conf.cache [edit]
[+] imunify-agent-proxy
[+] snmp-mibs-downloader
[+] ppp
[-] outgoing_mail_hold_users [edit]
[+] xdg
[-] eximrejects [edit]
[+] sos
[-] stats.conf-1645001869 [edit]
[-] protocols [edit]
[+] cron.daily
[+] chkserv.d
[+] systemd
[-] gshadow- [edit]
[+] dconf
[-] cpspamd.conf [edit]
[+] python3
[-] dbowners [edit]
[-] hosts [edit]
[-] agent360-token.ini [edit]
[-] hosts.allow [edit]
[+] powerdns
[+] rc0.d
[+] ufw
[-] manualmx [edit]
[-] exim_suspended_list [edit]
[+] iscsi
[+] libnl-3
[+] apparmor
[+] environment.d
[+] ghostscript
[-] bashrc [edit]
[+] mail
[-] nocgiusers [edit]
[+] lighttpd
[-] sos.conf [edit]
[-] exim.key [edit]
[-] mailbox_formats [edit]
[-] multipath.conf [edit]
[-] host.conf [edit]
[-] at.deny [edit]
[-] remotedomains [edit]
[-] quotatab [edit]
[-] cpsources.conf.plugins.example [edit]
[+] nginx
[-] blocked_incoming_email_domains [edit]
[-] bash.bashrc [edit]
[-] cpanel_exim_system_filter [edit]
[-] senderverifybypasshosts [edit]
[-] resolv.conf [edit]
[-] exim.conf.localopts [edit]
[-] my.cnf [edit]
[-] adduser.conf [edit]
[+] rc1.d
[+] firebird
[-] sysctl.conf [edit]
[-] fstab [edit]
[-] gai.conf [edit]
[-] exim.conf.dist [edit]
[-] tmpreaper.conf [edit]
[-] ethertypes [edit]
[-] wwwacct.conf [edit]
[-] exim.conf.mailman2.exiscan.dist [edit]
[+] default
[-] domainusers [edit]
[-] named.conf.cache [edit]
[-] wwwacct.conf.shadow [edit]
[-] ftpd-ca.pem [edit]
[+] elinks
[-] issue [edit]
[+] mysql
[-] bash_completion [edit]
[-] trueuserowners [edit]
[-] digestshadow [edit]
[-] quotagrpadmins [edit]
[-] secondarymx [edit]
[+] pam.d
[-] domain_remote_mx_ips.cdb [edit]
[+] calendar
[-] trustedmailhosts [edit]
[+] gtk-3.0
[+] ssl
[-] suphp.conf.dpkg-dist [edit]
[-] ca-certificates.conf [edit]
[+] vdomainaliases
[-] recent_recipient_mail_server_ips [edit]
[-] vtrgb [edit]
[-] pure-ftpd.pem [edit]
[-] subgid [edit]
[+] netplan
[+] ld.so.conf.d
[+] fonts
[-] recent_authed_mail_ips [edit]
[+] opt
[+] selinux
[-] ltrace.conf [edit]
[-] userips [edit]
[+] apt
[+] python3.8
[-] aliases [edit]
[-] timezone [edit]
[-] rpc [edit]
[+] dpkg
[+] bash_completion.d
[-] nsswitch.conf [edit]
[-] fuse.conf [edit]
[-] manpath.config [edit]
[+] lvm
[-] localdomains [edit]
[-] exim.conf.mailman2.dist [edit]
[-] e2scrub.conf [edit]
[+] sensors.d
[-] rmt [edit]
[-] mtab [edit]
[+] landscape
[+] rcS.d
[-] magic [edit]
[+] rsyslog.d
[+] update-motd.d
[-] shells [edit]
[+] binfmt.d
[+] python2.7
[-] blocked_incoming_email_countries [edit]
[+] initramfs-tools
[+] sudoers.d
[-] passwd [edit]
[-] mailhelo [edit]
[+] kernel
[-] debconf.conf [edit]
[-] userbwlimits [edit]
[+] NetworkManager
[+] dictionaries-common
[+] freetds
[+] ca-certificates
[-] ips.remotedns [edit]
[-] .pwd.lock [edit]
[-] debian_version [edit]
[+] pki
[-] popbeforesmtp [edit]
[+] vim
[-] zsh_command_not_found [edit]
[+] console-setup
[+] dhcp
[+] tmpfiles.d
[-] cron.deny [edit]
[-] subuid- [edit]
[+] cpanel
[+] libblockdev
[-] shadow- [edit]
[-] nscd.conf [edit]
[-] cpbackup-exclude.conf [edit]
[-] modules [edit]
[-] demouids [edit]
[+] nginx_conf.d.pre_install_ea_nginx_config
[+] csf
[-] magic.mime [edit]
[+] proftpd
[-] xattr.conf [edit]
[+] terminfo
[+] cron.hourly
[-] libuser.conf [edit]
[+] byobu
[+] apport
[-] ftpd-rsa.pem [edit]
[-] named.conf [edit]
[-] ipaddrpool [edit]
[-] stats.conf [edit]
[-] exim.conf [edit]
[-] idmapd.conf [edit]
[-] .whostmgrft [edit]
[-] mailcap.order [edit]
[-] ips [edit]
[+] scl
[+] bind
[-] exim.conf.local [edit]
[-] pure-ftpd.conf.dpkg-dist [edit]
[-] group- [edit]
[+] request-key.d
[+] needrestart
[+] udev
[-] pure-ftpd.conf [edit]
[+] logcheck
[+] skel
[+] UPower
[+] cron.weekly
[-] my.cnf.webhost1.zalaszam.hu.1645001869 [edit]
[+] init.d
[+] multipath
[+] pollinate
[-] blocked_incoming_email_country_ips [edit]
[-] spammeripblocks [edit]
[+] update-notifier
[-] mke2fs.conf [edit]
[-] usb_modeswitch.conf [edit]
[+] cracklib
[+] mc
[-] ucf.conf [edit]
[+] depmod.d
[-] userdatadomains.json [edit]
[-] nanorc [edit]
[+] pure-ftpd
[+] X11
[+] groff
[-] overlayroot.conf [edit]
[-] networks [edit]
[-] sensors3.conf [edit]
[-] ips.remotemail [edit]
[+] nghttpx
[+] molly-guard
[-] login.defs [edit]
[+] vmware-tools
[+] iptables
[+] imunify360
[-] locale.alias [edit]
[+] insserv.conf.d
[-] sudoers [edit]
[+] ldap
[+] snmp
[+] cloud
[+] rc6.d
[+] smartmontools
[-] trusted_mail_users [edit]
[+] thermald
[-] neighbor_netblocks [edit]
[+] networkd-dispatcher
[+] update-manager
[-] rsyslog.conf [edit]
[+] gss
[-] demodomains [edit]
[-] named.conf.zonedir.cache [edit]
[-] wwwacct.conf.shadow.cache [edit]
[-] machine-id [edit]
[-] netconfig [edit]
[+] PackageKit
[+] sw-engine
[-] exim.conf.localopts.shadow [edit]
[-] relayhosts [edit]
[-] ssldomains [edit]
[+] pdns
[-] popularity-contest.conf [edit]
[-] logrotate.conf [edit]
[-] pam.conf [edit]
[-] localtime [edit]
[-] recent_authed_mail_ips_users [edit]
[+] security
[+] mdadm
[-] services [edit]
[-] userdatadomains [edit]
[-] skipsmtpcheckhosts [edit]
[-] userdomains [edit]
[-] p0fdisable [edit]
[+] dovecot
[-] legal [edit]
[+] sysctl.d
[-] mecabrc [edit]
[-] bindresvport.blacklist [edit]
[-] cpanel_mail_netblocks [edit]
[-] hostname [edit]
[-] email_send_limits [edit]
[-] passwd.nouids.cache [edit]
[+] sysstat
[-] wgetrc [edit]
[-] ips.dnsmaster [edit]
[-] passwd- [edit]
[-] mailcap [edit]
[-] spammers [edit]
[-] profile [edit]
[-] ca-certificates.conf.dpkg-old [edit]
[-] hdparm.conf [edit]
[+] apache2
[+] valiases
[-] environment [edit]
[+] rc2.d
[-] ftpd-rsa-key.pem [edit]