ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: etc

#
# /etc/login.defs - Configuration control definitions for the login package.
#
# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
# If unspecified, some arbitrary (and possibly incorrect) value will
# be assumed.  All other items are optional - if not specified then
# the described action or option will be inhibited.
#
# Comment lines (lines beginning with "#") and blank lines are ignored.
#
# Modified for Linux.  --marekm

# REQUIRED for useradd/userdel/usermod
#   Directory where mailboxes reside, _or_ name of file, relative to the
#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
#   MAIL_DIR takes precedence.
#
#   Essentially:
#      - MAIL_DIR defines the location of users mail spool files
#        (for mbox use) by appending the username to MAIL_DIR as defined
#        below.
#      - MAIL_FILE defines the location of the users mail spool files as the
#        fully-qualified filename obtained by prepending the user home
#        directory before $MAIL_FILE
#
# NOTE: This is no more used for setting up users MAIL environment variable
#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
#       job of the pam_mail PAM modules
#       See default PAM configuration files provided for
#       login, su, etc.
#
# This is a temporary situation: setting these variables will soon
# move to /etc/default/useradd and the variables will then be
# no more supported
MAIL_DIR        /var/mail
#MAIL_FILE      .mail

#
# Enable logging and display of /var/log/faillog login failure info.
# This option conflicts with the pam_tally PAM module.
#
FAILLOG_ENAB		yes

#
# Enable display of unknown usernames when login failures are recorded.
#
# WARNING: Unknown usernames may become world readable. 
# See #290803 and #298773 for details about how this could become a security
# concern
LOG_UNKFAIL_ENAB	no

#
# Enable logging of successful logins
#
LOG_OK_LOGINS		no

#
# Enable "syslog" logging of su activity - in addition to sulog file logging.
# SYSLOG_SG_ENAB does the same for newgrp and sg.
#
SYSLOG_SU_ENAB		yes
SYSLOG_SG_ENAB		yes

#
# If defined, all su activity is logged to this file.
#
#SULOG_FILE	/var/log/sulog

#
# If defined, file which maps tty line to TERM environment parameter.
# Each line of the file is in a format something like "vt100  tty01".
#
#TTYTYPE_FILE	/etc/ttytype

#
# If defined, login failures will be logged here in a utmp format
# last, when invoked as lastb, will read /var/log/btmp, so...
#
FTMP_FILE	/var/log/btmp

#
# If defined, the command name to display when running "su -".  For
# example, if this is defined as "su" then a "ps" will display the
# command is "-su".  If not defined, then "ps" would display the
# name of the shell actually being run, e.g. something like "-sh".
#
SU_NAME		su

#
# If defined, file which inhibits all the usual chatter during the login
# sequence.  If a full pathname, then hushed mode will be enabled if the
# user's name or shell are found in the file.  If not a full pathname, then
# hushed mode will be enabled if the file exists in the user's home directory.
#
HUSHLOGIN_FILE	.hushlogin
#HUSHLOGIN_FILE	/etc/hushlogins

#
# *REQUIRED*  The default PATH settings, for superuser and normal users.
#
# (they are minimal, add the rest in the shell startup files)
ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games

#
# Terminal permissions
#
#	TTYGROUP	Login tty will be assigned this group ownership.
#	TTYPERM		Login tty will be set to this permission.
#
# If you have a "write" program which is "setgid" to a special group
# which owns the terminals, define TTYGROUP to the group number and
# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
# TTYPERM to either 622 or 600.
#
# In Debian /usr/bin/bsd-write or similar programs are setgid tty
# However, the default and recommended value for TTYPERM is still 0600
# to not allow anyone to write to anyone else console or terminal

# Users can still allow other people to write them by issuing 
# the "mesg y" command.

TTYGROUP	tty
TTYPERM		0600

#
# Login configuration initializations:
#
#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
#	UMASK		Default "umask" value.
#
# The ERASECHAR and KILLCHAR are used only on System V machines.
# 
# UMASK is the default umask value for pam_umask and is used by
# useradd and newusers to set the mode of the new home directories.
# 022 is the "historical" value in Debian for UMASK
# 027, or even 077, could be considered better for privacy
# There is no One True Answer here : each sysadmin must make up his/her
# mind.
#
# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
# for private user groups, i. e. the uid is the same as gid, and username is
# the same as the primary group name: for these, the user permissions will be
# used as group permissions, e. g. 022 will become 002.
#
# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
#
ERASECHAR	0177
KILLCHAR	025
UMASK		022

#
# Password aging controls:
#
#	PASS_MAX_DAYS	Maximum number of days a password may be used.
#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
#	PASS_WARN_AGE	Number of days warning given before a password expires.
#
PASS_MAX_DAYS	99999
PASS_MIN_DAYS	0
PASS_WARN_AGE	7

#
# Min/max values for automatic uid selection in useradd
#
UID_MIN			 1000
UID_MAX			60000
# System accounts
#SYS_UID_MIN		  100
#SYS_UID_MAX		  999

#
# Min/max values for automatic gid selection in groupadd
#
GID_MIN			 1000
GID_MAX			60000
# System accounts
#SYS_GID_MIN		  100
#SYS_GID_MAX		  999

#
# Max number of login retries if password is bad. This will most likely be
# overriden by PAM, since the default pam_unix module has it's own built
# in of 3 retries. However, this is a safe fallback in case you are using
# an authentication module that does not enforce PAM_MAXTRIES.
#
LOGIN_RETRIES		5

#
# Max time in seconds for login
#
LOGIN_TIMEOUT		60

#
# Which fields may be changed by regular users using chfn - use
# any combination of letters "frwh" (full name, room number, work
# phone, home phone).  If not defined, no changes are allowed.
# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
# 
CHFN_RESTRICT		rwh

#
# Should login be allowed if we can't cd to the home directory?
# Default in no.
#
DEFAULT_HOME	yes

#
# If defined, this command is run when removing a user.
# It should remove any at/cron/print jobs etc. owned by
# the user to be removed (passed as the first argument).
#
#USERDEL_CMD	/usr/sbin/userdel_local

#
# Enable setting of the umask group bits to be the same as owner bits
# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
# the same as gid, and username is the same as the primary group name.
#
# If set to yes, userdel will remove the user's group if it contains no
# more members, and useradd will create by default a group with the name
# of the user.
#
USERGROUPS_ENAB yes

#
# Instead of the real user shell, the program specified by this parameter
# will be launched, although its visible name (argv[0]) will be the shell's.
# The program may do whatever it wants (logging, additional authentification,
# banner, ...) before running the actual shell.
#
# FAKE_SHELL /bin/fakeshell

#
# If defined, either full pathname of a file containing device names or
# a ":" delimited list of device names.  Root logins will be allowed only
# upon these devices.
#
# This variable is used by login and su.
#
#CONSOLE	/etc/consoles
#CONSOLE	console:tty01:tty02:tty03:tty04

#
# List of groups to add to the user's supplementary group set
# when logging in on the console (as determined by the CONSOLE
# setting).  Default is none.
#
# Use with caution - it is possible for users to gain permanent
# access to these groups, even when not logged in on the console.
# How to do it is left as an exercise for the reader...
#
# This variable is used by login and su.
#
#CONSOLE_GROUPS		floppy:audio:cdrom

#
# If set to "yes", new passwords will be encrypted using the MD5-based
# algorithm compatible with the one used by recent releases of FreeBSD.
# It supports passwords of unlimited length and longer salt strings.
# Set to "no" if you need to copy encrypted passwords to other systems
# which don't understand the new algorithm.  Default is "no".
#
# This variable is deprecated. You should use ENCRYPT_METHOD.
#
#MD5_CRYPT_ENAB	no

#
# If set to MD5 , MD5-based algorithm will be used for encrypting password
# If set to SHA256, SHA256-based algorithm will be used for encrypting password
# If set to SHA512, SHA512-based algorithm will be used for encrypting password
# If set to DES, DES-based algorithm will be used for encrypting password (default)
# Overrides the MD5_CRYPT_ENAB option
#
# Note: It is recommended to use a value consistent with
# the PAM modules configuration.
#
ENCRYPT_METHOD SHA512

#
# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
#
# Define the number of SHA rounds.
# With a lot of rounds, it is more difficult to brute forcing the password.
# But note also that it more CPU resources will be needed to authenticate
# users.
#
# If not specified, the libc will choose the default number of rounds (5000).
# The values must be inside the 1000-999999999 range.
# If only one of the MIN or MAX values is set, then this value will be used.
# If MIN > MAX, the highest value will be used.
#
# SHA_CRYPT_MIN_ROUNDS 5000
# SHA_CRYPT_MAX_ROUNDS 5000

################# OBSOLETED BY PAM ##############
#						#
# These options are now handled by PAM. Please	#
# edit the appropriate file in /etc/pam.d/ to	#
# enable the equivelants of them.
#
###############

#MOTD_FILE
#DIALUPS_CHECK_ENAB
#LASTLOG_ENAB
#MAIL_CHECK_ENAB
#OBSCURE_CHECKS_ENAB
#PORTTIME_CHECKS_ENAB
#SU_WHEEL_ONLY
#CRACKLIB_DICTPATH
#PASS_CHANGE_TRIES
#PASS_ALWAYS_WARN
#ENVIRON_FILE
#NOLOGINS_FILE
#ISSUE_FILE
#PASS_MIN_LEN
#PASS_MAX_LEN
#ULIMIT
#ENV_HZ
#CHFN_AUTH
#CHSH_AUTH
#FAIL_DELAY

################# OBSOLETED #######################
#						  #
# These options are no more handled by shadow.    #
#                                                 #
# Shadow utilities will display a warning if they #
# still appear.                                   #
#                                                 #
###################################################

# CLOSE_SESSIONS
# LOGIN_STRING
# NO_PASSWORD_CONSOLE
# QMAIL_DIR

[+] ..
[+] logrotate.d
[-] userplans [edit]
[-] warnquota.conf [edit]
[-] subgid- [edit]
[+] usb_modeswitch.d
[+] vfilters
[-] libaudit.conf [edit]
[+] sysconfig
[-] backupmxhosts [edit]
[+] perl
[-] cpupdate.conf-1645001869 [edit]
[-] exim.crt [edit]
[+] apparmor.d
[-] deluser.conf [edit]
[+] modprobe.d
[+] libpaper.d
[+] udisks2
[-] greylist_common_mail_providers [edit]
[-] shadow.nouids.cache [edit]
[+] cron.d
[-] resolv.conf.sav [edit]
[-] group [edit]
[-] localdomains.dpkg-dist [edit]
[+] rc4.d
[+] polkit-1
[-] relayhostsusers [edit]
[+] fwupd
[+] network
[-] os-release [edit]
[-] gshadow [edit]
[+] ModemManager
[-] lock_manager_local.ini [edit]
[-] cpupdate.conf [edit]
[-] subuid [edit]
[-] crypttab [edit]
[+] alternatives
[-] issue.net [edit]
[+] mono
[+] rc3.d
[-] outgoing_mail_suspended_users [edit]
[-] agent360.ini [edit]
[-] eximrejects.dpkg-dist [edit]
[+] dbus-1
[-] ld.so.conf [edit]
[+] grub.d
[-] eximmailtrap [edit]
[+] ssh
[-] trueuserdomains [edit]
[-] antivirus.exim [edit]
[-] mime.types [edit]
[-] mailips [edit]
[+] modules-load.d
[-] exim.pl.local [edit]
[-] locale.gen [edit]
[-] demousers [edit]
[+] emacs
[+] cryptsetup-initramfs
[-] domainips [edit]
[-] request-key.conf [edit]
[-] ld.so.cache [edit]
[-] localaliases [edit]
[+] profile.d
[-] exim_trusted_configs [edit]
[-] passwd.cache [edit]
[-] hosts.deny [edit]
[-] crontab [edit]
[-] shadow [edit]
[-] lsb-release [edit]
[+] zabbix
[+] newt
[-] screenrc [edit]
[-] suphp.conf [edit]
[+] rc5.d
[+] iproute2
[+] pm
[-] exim.pl [edit]
[-] greylist_trusted_netblocks [edit]
[-] inputrc [edit]
[+] ubuntu-advantage
[+] cron.monthly
[-] papersize [edit]
[-] agent360.ini.dpkg-dist [edit]
[-] smartd.conf [edit]
[-] wwwacct.conf.cache [edit]
[+] imunify-agent-proxy
[+] snmp-mibs-downloader
[+] ppp
[-] outgoing_mail_hold_users [edit]
[+] xdg
[-] eximrejects [edit]
[+] sos
[-] stats.conf-1645001869 [edit]
[-] protocols [edit]
[+] cron.daily
[+] chkserv.d
[+] systemd
[-] gshadow- [edit]
[+] dconf
[-] cpspamd.conf [edit]
[+] python3
[-] dbowners [edit]
[-] hosts [edit]
[-] agent360-token.ini [edit]
[-] hosts.allow [edit]
[+] powerdns
[+] rc0.d
[+] ufw
[-] manualmx [edit]
[-] exim_suspended_list [edit]
[+] iscsi
[+] libnl-3
[+] apparmor
[+] environment.d
[+] ghostscript
[-] bashrc [edit]
[+] mail
[-] nocgiusers [edit]
[+] lighttpd
[-] sos.conf [edit]
[-] exim.key [edit]
[-] mailbox_formats [edit]
[-] multipath.conf [edit]
[-] host.conf [edit]
[-] at.deny [edit]
[-] remotedomains [edit]
[-] quotatab [edit]
[-] cpsources.conf.plugins.example [edit]
[+] nginx
[-] blocked_incoming_email_domains [edit]
[-] bash.bashrc [edit]
[-] cpanel_exim_system_filter [edit]
[-] senderverifybypasshosts [edit]
[-] resolv.conf [edit]
[-] exim.conf.localopts [edit]
[-] my.cnf [edit]
[-] adduser.conf [edit]
[+] rc1.d
[+] firebird
[-] sysctl.conf [edit]
[-] fstab [edit]
[-] gai.conf [edit]
[-] exim.conf.dist [edit]
[-] tmpreaper.conf [edit]
[-] ethertypes [edit]
[-] wwwacct.conf [edit]
[-] exim.conf.mailman2.exiscan.dist [edit]
[+] default
[-] domainusers [edit]
[-] named.conf.cache [edit]
[-] wwwacct.conf.shadow [edit]
[-] ftpd-ca.pem [edit]
[+] elinks
[-] issue [edit]
[+] mysql
[-] bash_completion [edit]
[-] trueuserowners [edit]
[-] digestshadow [edit]
[-] quotagrpadmins [edit]
[-] secondarymx [edit]
[+] pam.d
[-] domain_remote_mx_ips.cdb [edit]
[+] calendar
[-] trustedmailhosts [edit]
[+] gtk-3.0
[+] ssl
[-] suphp.conf.dpkg-dist [edit]
[-] ca-certificates.conf [edit]
[+] vdomainaliases
[-] recent_recipient_mail_server_ips [edit]
[-] vtrgb [edit]
[-] pure-ftpd.pem [edit]
[-] subgid [edit]
[+] netplan
[+] ld.so.conf.d
[+] fonts
[-] recent_authed_mail_ips [edit]
[+] opt
[+] selinux
[-] ltrace.conf [edit]
[-] userips [edit]
[+] apt
[+] python3.8
[-] aliases [edit]
[-] timezone [edit]
[-] rpc [edit]
[+] dpkg
[+] bash_completion.d
[-] nsswitch.conf [edit]
[-] fuse.conf [edit]
[-] manpath.config [edit]
[+] lvm
[-] localdomains [edit]
[-] exim.conf.mailman2.dist [edit]
[-] e2scrub.conf [edit]
[+] sensors.d
[-] rmt [edit]
[-] mtab [edit]
[+] landscape
[+] rcS.d
[-] magic [edit]
[+] rsyslog.d
[+] update-motd.d
[-] shells [edit]
[+] binfmt.d
[+] python2.7
[-] blocked_incoming_email_countries [edit]
[+] initramfs-tools
[+] sudoers.d
[-] passwd [edit]
[-] mailhelo [edit]
[+] kernel
[-] debconf.conf [edit]
[-] userbwlimits [edit]
[+] NetworkManager
[+] dictionaries-common
[+] freetds
[+] ca-certificates
[-] ips.remotedns [edit]
[-] .pwd.lock [edit]
[-] debian_version [edit]
[+] pki
[-] popbeforesmtp [edit]
[+] vim
[-] zsh_command_not_found [edit]
[+] console-setup
[+] dhcp
[+] tmpfiles.d
[-] cron.deny [edit]
[-] subuid- [edit]
[+] cpanel
[+] libblockdev
[-] shadow- [edit]
[-] nscd.conf [edit]
[-] cpbackup-exclude.conf [edit]
[-] modules [edit]
[-] demouids [edit]
[+] nginx_conf.d.pre_install_ea_nginx_config
[+] csf
[-] magic.mime [edit]
[+] proftpd
[-] xattr.conf [edit]
[+] terminfo
[+] cron.hourly
[-] libuser.conf [edit]
[+] byobu
[+] apport
[-] ftpd-rsa.pem [edit]
[-] named.conf [edit]
[-] ipaddrpool [edit]
[-] stats.conf [edit]
[-] exim.conf [edit]
[-] idmapd.conf [edit]
[-] .whostmgrft [edit]
[-] mailcap.order [edit]
[-] ips [edit]
[+] scl
[+] bind
[-] exim.conf.local [edit]
[-] pure-ftpd.conf.dpkg-dist [edit]
[-] group- [edit]
[+] request-key.d
[+] needrestart
[+] udev
[-] pure-ftpd.conf [edit]
[+] logcheck
[+] skel
[+] UPower
[+] cron.weekly
[-] my.cnf.webhost1.zalaszam.hu.1645001869 [edit]
[+] init.d
[+] multipath
[+] pollinate
[-] blocked_incoming_email_country_ips [edit]
[-] spammeripblocks [edit]
[+] update-notifier
[-] mke2fs.conf [edit]
[-] usb_modeswitch.conf [edit]
[+] cracklib
[+] mc
[-] ucf.conf [edit]
[+] depmod.d
[-] userdatadomains.json [edit]
[-] nanorc [edit]
[+] pure-ftpd
[+] X11
[+] groff
[-] overlayroot.conf [edit]
[-] networks [edit]
[-] sensors3.conf [edit]
[-] ips.remotemail [edit]
[+] nghttpx
[+] molly-guard
[-] login.defs [edit]
[+] vmware-tools
[+] iptables
[+] imunify360
[-] locale.alias [edit]
[+] insserv.conf.d
[-] sudoers [edit]
[+] ldap
[+] snmp
[+] cloud
[+] rc6.d
[+] smartmontools
[-] trusted_mail_users [edit]
[+] thermald
[-] neighbor_netblocks [edit]
[+] networkd-dispatcher
[+] update-manager
[-] rsyslog.conf [edit]
[+] gss
[-] demodomains [edit]
[-] named.conf.zonedir.cache [edit]
[-] wwwacct.conf.shadow.cache [edit]
[-] machine-id [edit]
[-] netconfig [edit]
[+] PackageKit
[+] sw-engine
[-] exim.conf.localopts.shadow [edit]
[-] relayhosts [edit]
[-] ssldomains [edit]
[+] pdns
[-] popularity-contest.conf [edit]
[-] logrotate.conf [edit]
[-] pam.conf [edit]
[-] localtime [edit]
[-] recent_authed_mail_ips_users [edit]
[+] security
[+] mdadm
[-] services [edit]
[-] userdatadomains [edit]
[-] skipsmtpcheckhosts [edit]
[-] userdomains [edit]
[-] p0fdisable [edit]
[+] dovecot
[-] legal [edit]
[+] sysctl.d
[-] mecabrc [edit]
[-] bindresvport.blacklist [edit]
[-] cpanel_mail_netblocks [edit]
[-] hostname [edit]
[-] email_send_limits [edit]
[-] passwd.nouids.cache [edit]
[+] sysstat
[-] wgetrc [edit]
[-] ips.dnsmaster [edit]
[-] passwd- [edit]
[-] mailcap [edit]
[-] spammers [edit]
[-] profile [edit]
[-] ca-certificates.conf.dpkg-old [edit]
[-] hdparm.conf [edit]
[+] apache2
[+] valiases
[-] environment [edit]
[+] rc2.d
[-] ftpd-rsa-key.pem [edit]